| Specifications

Color: custom color

Packing unit:

Medium - 25kg/PL

Top coat - 19kg/PL

Standard Requirement : 

Medium - Spray 0.8 ~ 1kg/㎡

Top coat - 0.6 ~ 0.8 kg/㎡

| Usage 

If you want to create an effect such as fine marble or tile.
For interior decoration of apartments, public buildings, etc.

 | Main Features 

It is a high-quality spray paint that is made of special acrylic polymer and special particles of various colors as main components, and contains pearl and glitter. In addition, it has less surface irregularities compared to general stone spraying materials, so it is a product with very good contamination resistance.

| Precautions 

1. The base surface to be installed must be a wall, and it must not be installed on a

base surface such as a horizontal surface other than a wall.
2. During construction and drying, the ambient temperature and wall temperature

should be 5 ~ 35˚C, and the humidity in the air should be 80% or less.
3. Check the weather conditions before and after work so that the product is not exposed to rain, etc.
4. If it is judged that there is an abnormality during the work, the work shall be stopped and the cause shall be corrected before construction.
5. The construction company must be a company that has received sufficient training from Baroco Korea Co., Ltd. and must fully understand the precautions.
6. Do not add any substances other than designated tap water.
7. Before work, check if the production date (LOT) is the same, and if there is no difference, compare the color of the product and work if there is no problem.
8. After finishing the finishing work, the work surface must be protected from damage due to weather conditions such as rain and snow and other causes such as impact for at least 48 hours.

※ This product is a water-soluble product supplied based on Baroco Korea's proprietary technology and quality control system, and we are not responsible for any defects in the product due to storage in winter, mixed use with other products, negligence in construction, or non-compliance with specified specifications.

 ※ The above data was produced based on the knowledge obtained through long-term experimental KNOW-HOW and field activities of Baroco Korea, but it is subject to change without notice due to continuous quality improvement. Also, it may change depending on the site conditions, climatic conditions, and coating method during painting, so please review it thoroughly before using.

| Construction method

Undercoating: Apply color primer at least once on the dried and cleaned base surface using a roller, etc.

Intermediate work: After confirming that the undercoating surface is dry, use a stone gun to make the entrance of the stone gun perpendicular to the base surface, and evenly spray the middle coat of Nextstone to a certain thickness

Topcoating: After drying the intermediate working surface, spray the Nexttone topcoat using a pressure gun.
The texture can be expressed more easily by spraying by applying high pressure to cover the base surface during work, and then spraying by lowering the pressure to put particles on it.
During the finishing work, continuous work must be done, and even if the work is stopped due to circumstances, the construction must be completed on the working surface. When spraying Nexttone, spray it in 2~3 times as it may drip if you spray a lot at once.

| Technic article