The World Best Quality
BAROPRIMER & COATING
Primer - Excellent adhesion and increases the adhesion of the working surface.
Coating material - Transparent coating material to increase the durability and contamination resistance of the finished surface after general finishing material construction
| Specifications
Packing unit: 17L/tong
Requirement: 50-60m²/PL | 0.25~0.3kg/m²
| Usage
1. Increase the adhesion of mortar (adhesion/impregnation) and finishing materials when primer is applied to the working surface before construction
2. Increase the durability and stain resistance of the finished surface during use and coating after construction of finishing materials
3. When repainting, it is used for old, worn out and polluted finished construction surfaces.
| Main Features
※ primer
1. Using acrylic polymer
2. It has excellent adhesion and increases the adhesion of the working surface.
※ Coating material
1. Two types of acrylic polymer (glossy) and water-soluble silicone polymer (matte)
2. Topcoat transparent coating material to increase durability and contamination resistance of the finished surface after general finishing materials are installed
※ Repainting material
1. Products useful for repainting contaminated finished surfaces
2. Using acrylic polymer and inorganic water-soluble pigment
| Precautions
1. During construction and drying, the ambient temperature and wall temperature should be 5~35˚C, and the humidity in the air should be less than 80%.
2. Check the weather conditions before and after work so that the product is not exposed to rain, etc.
3. Reconstruct the contaminated or damaged parts after repair.
4. When it is judged that there is an abnormality during the work, the work shall be stopped, the work shall be checked, and the cause shall be corrected before construction.
| Construction method
1. Work with brushes, rollers and sprays
2. Use after removing foreign substances from the base surface (the silver foil surface of the PF board)
3. Before use, stir thoroughly with a mixer before use
4. After the primer is completely dried, mortar (adhesive/impregnated) and finishing materials are installed
5. Do not mix with other companies' products or other substances.
6. When applying the coating material, use it after the finished surface is completely dried.
7. When repainting, paint the work surface 1-2 times (if necessary) and use it.
| Technic article
C.E.O : Yoon Wanjoong Business Lisense : 136-81-25371
Mail order report number : 2018-경기김포-0617호 E-mail : baroco@baroco.co.kr
Seoul Ofiice | B-1806, Woorim Bluenine, Yangcheon-ro 583,Gangseo-gu, Seoul
TEL. +82-2-2695-8533 FAX. +82-2-2695-8543
Factory | Daeseomyeong-ro 65-1, Tongjin-eup, Gimpo-si, Gyeonggi-do
TEL. +82-31-983-4188 FAX. +82-31-983-4186
Factory | 117, Biseokdong-ro 27beon-gil, Wolgot-myeon, Gimpo-si, Gyeonggi-do
TEL. +82-31-991-3424 FAX. +82-31-983-3324
COPYRIGHT (C) 2021 BAROCO. ALL RIGHTS RESERVED
