| Specifications

Packing unit: 25kg/tong

Standard requirements: Joint treatment 0.3~0.5kg/m2 / Front treatment 1.2~1.5kg/m2

 | Main Features 

For external use: Products used for repairing cracks outside the building and for external background treatment

For internal use: A product used for all putty on the joint surface and the base surface

| Construction method

■ Basic conditions
When working, the base surface must be dry and free of contaminants such as dust, oil, cement lumps, etc., and must be clean.
(1) Concrete surface (pH 7~9)
The surface must be cured for at least one month after pouring, and if the foam separator and curing material are on it, it must be thoroughly cleaned with chemicals and the remaining chemicals on the surface must also be removed.
In addition, air bubbles on the concrete surface are filled through putty work, and the protruding part is removed through sanding, etc.
(2) other surfaces
Remove dust, dirt, mold, etc. and apply after reviewing whether there is a problem with adhesion.

■ Product construction
Apply a thin layer of a putty spatula, iron trowel, or putty knife where adjustment is required on the surface such as indentations and crevices. In case of thick coating, apply thinly several times. In general, the thickness of the coating film is about 2mm.
※ Based on repainting interval
5˚C (24 hours) / 20˚C (16 hours) / 30˚C (8 hours)

| 기술자료