koreabaroco

The World Best Quality

By installing a gutter along with the airtight construction of the windows, rainwater is prevented from entering between the windows and the external insulation.
It is a differentiated system that plays a role in extending the lifespan of a building by preventing the area around the windows from getting dirty by rainwater and dust.

Notes on installation

1. RAINGUTTER

Install the expansion band on the upper part of the harness. In this case,

the expansion band should be left in advance for the length of the vertical frame of the window.

2. RAINGUTTER

Pre-attach the expansion band at the point where the end-to-insulation end contacts.

3. RAINGUTTER
Install the expansion band on the other side of the upper part of the harness.

As in the beginning, you need to leave extra in advance for the length of the vertical frame of the window.

4. Fill the bottom of the window frame with urethane foam. When filling, keep an angle of 5 degrees for water flow and fill.

5.Install the drip tray with the expansion band attached deep toward the front of the Zolbank.

6. From the upper part of the window frame, install an insulating material with fire resistance of 30mm or more.

7. After installing the upper part, install the insulating material on the left and right side frames.

C.E.O : Yoon Wanjoong Business Lisense : 136-81-25371

Mail order report number : 2018-경기김포-0617호 E-mail : baroco@baroco.co.kr

Seoul Ofiice | B-1806, Woorim Bluenine, Yangcheon-ro 583,Gangseo-gu, Seoul

TEL. +82-2-2695-8533 FAX. +82-2-2695-8543

Factory | Daeseomyeong-ro 65-1, Tongjin-eup, Gimpo-si, Gyeonggi-do

TEL. +82-31-983-4188 FAX. +82-31-983-4186

Factory | 117, Biseokdong-ro 27beon-gil, Wolgot-myeon, Gimpo-si, Gyeonggi-do

TEL. +82-31-991-3424 FAX. +82-31-983-3324