The World Best Quality
standard finish | BAROCOAT
It is the most commonly used finishing paint among domestic exterior wall insulation system (E.I.F.S) finishing paints. It has excellent adhesion,
water repellency, elasticity, etc., making it possible to create a certain pattern using a trowel.
With over 50 standard colors and various color combinations according to customer's order, you are free to choose the color and pattern you want.
COLOR & TEXTURE GUIDE
| Specifications
Color: custom
color Packing unit: 25kg/PL
Standard requirement: 2.5 ~ 3.1 kg/m²
| Usage
It is used in various buildings such as resorts,
small and medium-sized houses, officetels, and public buildings.
For general texture finishing in the applied exterior wall
insulation system (EIFS)
| Main Features
It is the most commonly used finishing paint among domestic exterior wall insulation system (E.I.F.S) finishing paints. It has excellent adhesion, water repellency, and elasticity, so it is possible to create a certain pattern using a trowel.
With over 50 standard colors and various color combinations according to customer's order, you are free to choose the color and pattern you want.
| Precautions
1. The base surface to be installed must be a wall, and it must not be installed on a
base surface such as a horizontal surface other than a wall.
2. During construction and drying, the ambient temperature and wall temperature
should be 5~35˚C, and the humidity in the air should be 80% or less.
3. Check the weather conditions before and after work so that the product is not exposed to rain, etc.
4. If it is judged that there is an abnormality during the work, the work shall be stopped and the cause shall be corrected before construction.
5. The construction company must be a company that has received sufficient training from Baroco Korea Co., Ltd. and must fully understand the precautions.
6. Do not add any substances other than designated tap water.
7. Before work, check if the production date (LOT) is the same, and if there is no difference, compare the color of the product and work if there is no problem.
8. After finishing the finishing work, the work surface must be protected from damage due to weather conditions such as rain and snow and other causes such as impact for at least 48 hours.
※ This product is a water-soluble product supplied based on Baroco Korea's proprietary technology and quality control system. We are not responsible for product defects due to negligence in construction or non-compliance with specified specifications.
※ The above data was produced based on the knowledge obtained through long-term experimental KNOW-HOW and field activities of Baroco Korea, but it is subject to change without notice due to continuous quality improvement.
In addition, it may change depending on the site conditions, climatic conditions, and coating method during painting, so the user
Please use it after thorough review.
| Construction method
Plastering work: Using a clean, undamaged iron trowel (stainless steel material), spread it evenly to a certain thickness (1.2mm ~ 1.5mm), and then draw the thick silica sand in a certain direction with a plastic antiquity to express a specific pattern.
During the finishing work, continuous work should be done, and if it is interrupted due to circumstances, the construction of the working surface should be completed.
| 기술자료
C.E.O : Yoon Wanjoong Business Lisense : 136-81-25371
Mail order report number : 2018-경기김포-0617호 E-mail : baroco@baroco.co.kr
Seoul Ofiice | B-1806, Woorim Bluenine, Yangcheon-ro 583,Gangseo-gu, Seoul
TEL. +82-2-2695-8533 FAX. +82-2-2695-8543
Factory | Daeseomyeong-ro 65-1, Tongjin-eup, Gimpo-si, Gyeonggi-do
TEL. +82-31-983-4188 FAX. +82-31-983-4186
Factory | 117, Biseokdong-ro 27beon-gil, Wolgot-myeon, Gimpo-si, Gyeonggi-do
TEL. +82-31-991-3424 FAX. +82-31-983-3324
COPYRIGHT (C) 2021 BAROCO. ALL RIGHTS RESERVED
